NATURAL SOAP
PRODUCT INFORMATION
F 14.2
F 14.2
GENERAL DESCRIPTION
Use Natural Soap for regular cleaning of soap and oil-treated wooden floors as well as for protection of lye-treated surfaces.
Natural Soap seals the open pores of the wood, thus giving the floor a light protection against dirt and liquid penetration.
For professional and private use.
PRODUCT DESCRIPTION
Package sizes: 2½ litres.
Ingredients:
Water, CAS No. 7732-18-5 (AQUA)
Soap
Citric acid, CAS No. 77-92-9 (CITRIC ACID)
Alanine, N,N-bis(carboxymethyl)-, trisodium salt, CAS No. 164462-16-2 (TRISODIUM DICARBOXYMETHYL ALANINATE)
2-Phenoxyethanol, CAS No. 122-99-6 (PHENOXYETHANOL)
TECHNICAL DATA
Coverage: 50-100 m² per litre.
pH: Concentrated 10.5 Diluted approx. 9.
Before use: Shake the can well.
Application tools: Cloth or flat mop.
Substrate temperature: Minimum 15 °C.
Storage: Lasts for 2 years if unopened and stored at 20 °C. Not to be exposed to temperatures below 5 °C.
DIRECTIONS FOR USE
Always use a well-wrung cloth or mop and remember that a wooden floor does not tolerate soaking. Any water spillage must be wiped up straight away so as to avoid water damage.
Regular cleaning:
- Sweep or vacuum the floor to remove dirt and grit.
- Mix 250 ml Natural Soap with 5 litres of warm water.
- Wash the surface along the direction of the floorboards and woodgrain.
- Always use a hard-wrung floor cloth or mop
- Remember that a wooden floor does not tolerate soaking. Any water spillage must be wiped up immediately to avoid moisture damage.
- If the floor is very dirty you can work with two buckets, one for clean soapy water and the other for wringing out the cloth.
PRECAUTIONARY MEASURES
Before using the product, read the label on the container carefully and observe the recommended precautionary measures. See Safety Data Sheet for detailed information.